产品展示
  产品介绍
  产品应用范围
  产品出厂规范
  致冷器件制冷特点
  器件特征曲线
  产品使用注意事项
  产品信息
   除查询“所有产品”外,必须要输入关键字,才能查询
   根据产品序号来查询时,关键字里只能输入数字。
 
  鸿昌首页 > 产品出厂规范

产品出厂规范



商品名称:半导体热电致冷芯片
型 号:TECl一一系列按致冷组件参数表所列
      TESl一一系列包括微型及多级器件
包装要求:外包装箱为标准瓦楞出口纸箱,内装泡沫硬盒(不同型号数量不一)。
外箱尺寸为515*280*300mm
技术参数及检验要求:
1.每装运一批次必须随附检验报告。
2.本公司的检验合格报告,证明所检货物与为供货方提供的样品的参数一致。
本公司的详细检验项目如下:
(1)外观检验,包括:a.轻缺陷:表面及边缘的缺损及不规则:
b.轻缺陷:表面孔状缺陷;
c.轻缺陷:瓷板面及导线有污渍:
d.重缺陷:外型的不完整,如断裂或有细微裂纹。
(2)参数及尺寸检验:a.陶瓷尺寸规格:按客户要求.型号与致冷器件参数表一致:
b.阻抗规格:同上:
c.负载电流规格:在额定电压情况下,与参数表一致:
d.每一致冷片必须带有两根引线,一根为红色.一根为黑色,长度按客户要求。
引线位置为:致冷面朝上,引线朝下本公司产品平均质量水平AQL值为1.5。

Product standards
Item: I thermoelectric module
Model: TEC1 series: refer to thermoelectric Module specification Table
TES1 series includes mini type and multistage units
Package: Outer package: corrugated export case
Inter package: hard foam case (Various quantity to each type)
Outer size: 515*280* 330mm
Technical reference and check requirement 10ne quality check report attached to
each batch 2 the quality check pass report testifies that the product is of the
equal reference to the samples.
Content of qual ity check:
(1)Appearance:
a. Light defect: and irregularity of surface and edges;
b. Light defect: hole like defect on surface;
c. Light defect: sewage on ceramic plate or leads;
d. Heavy defects: lace of black heat shrinkable tube on the connecting terminal
of the TE module.
(2)Check of reference and size:
a. Standards of ceramic part: in accordance with client requirement.
b. Standards of resistance: in accordance with client requirement.
c. Standards of loading current: in accordance with specification table in the
range of rated voltage.
d. Position of leads: when cold surface is upward, the leads are downward.
Average quality level (AQL)of our products is 1.5.

 
 
Copyright © 2006-2020 河南鸿昌电子有限公司, All Rights Reserved.豫ICP备19039122号
鸿昌地址:长葛市产业集聚区魏武路东秦公路北侧  电话:0374-6221169   6231058  传真:0374-6228866   6221169
  手机:15393788002  13298216633
日本本地色情成人资源,日韩不卡一二三区,亚洲一中文字暮自慰,亚洲AV有码在线